Almost all the features of the hublot king power oceanographic 4000 king gold replica watch are exceptional, in terms of design, development and manufacturing.

To ensure the watertightness of the watch and to resist this extreme pressure, the synthetic sapphire crystal is 6.5 thick. The case back is screw-down, a sine qua non for reaching such depths. This is thicker than normal, but is reasonable for this level of resistance.Starting with its seal, tested by Hublot in a Roxer tank, submerged and pressurised to the equivalent of 5,000 metres. It is made of grade 2 titanium, an extremely strong stainless material.

The hublot king power oceanographic 4000 replica  is fitted with two screw-down crowns (a protective measure that helps ensure water resistance by compression of an O-ring seal).The flange crown which sets the dive time is placed at the 2 o’clock position for easy access and more comfortable use. The second crown, for winding and setting the time and date, is positioned at 4 o’clock to avoid obstruction. It is unidirectional, again for safety reasons, with a bayonet fitting and protected by an oversized crown guard, for extra safety and easy operation when handling diving equipment.

As its case is made of King Gold (18K gold with 5% of platinum which gives this special intense red color), the Oceanographic 4000 is still light on the wrist – although its diameter of 48 mm and its volume is substantial.

A genuine instrument with technology developed to the extreme, ergonomics for efficiency and ease of handling, this watch was conceived and designed to push the limits of the possible.

In accordance with the standard, the Oceanographic 4000 has a minute scale on which the five-minute periods are clearly highlighted.It also makes the dive time easier to read.

The hublot king power replica dive time indicator being placed as close as possible to the dial minimises the risk of inadvertently altering the dive time.The reading method has been made as safe as possible, using an internal rotating flange which is unidirectional and rack-driven, with a dive time indicator.

To meet this requirement, the dial, the flange and the hands of the hublot replica watches have been optimised to have a larger surface area treated with SuperLuminova™, a luminescent material emitting a white colour.From the brightness standpoint, the time and elapsed time measured by the flange must be legible from a distance of 25 cm in the dark.